Beaded lariat in silver and grey

This is my first lariat. I believe that I am proud as I have managed to make a necklace from very few components. The trick in this piece is to bunch all of the beads used at the ends so that they make a striking focal point.

The other thing about this lariat is that you don't really need any findings. The necklace is closed by looping one side over the other. I used the new P'Leather to string the beads and it is wonderfully non slip so it can be placed without the fear of your beads ending up in colourful pile on the floor.

So, what do we have to do?

In the picture below are the beads and P'Leather that I used.

You can find them here on Craft Fairy:

Lt. Rose, 6/0 Glass Seed Beads, Opaque about 4mm, 

 Acrylic Beads, Faceted Oval, Silver Colour about 24mm long

Spacer Beads, Platinum Color, 8mm hole: 3mm

P'Leather Cord 1mm diameter Black, 5 meters

Shocking Pink Painted Glass Beads, Round, 16mm x 10 beads

Start by cutting your 5 metrese of P'leather into three equal lengths.

On to two of the ends, thread a 4mm rose bead, a platinum spacer, a pink glass bead and a 4mm rose bead. Tie a knot at the end of the p'leather to keep the beads from falling off the end. Then tie another knot after the last rose bead. See below:

Once you have done this on two of the ends, you can add a little variety and thread the third cord ens with a silver oval bead instead.

Before you tie the know in the p'leather stager the length of the cords as shown above. Tie a knot about 10 - 15 cm from the end of the last bead. You don't have to be too precious about this, it all depends on how long you want to have the dangling beads.

Now on two of the cords only, thread on a silver faceted bead. Tie all three cords into a knot after the bead.

Now leave a gap of about 10 cm and tie another knot. Then thread a large pink bead onto 1 thread. You won't be able to get two threads through. Tie a knot after the bead.

Leave another 10 ch and tie a knot. Thread all three cords through one of the platinmum spacers and thie another knot.

Leave 20 cm and tie another knot. Add a platinum spacer and knot. 

Leave 10 cm and tie a knot. Thread on a Silver faceted bead and tie a knot. 

Leave 10cm and tie a knot. Thread on a pink bead and tie a knot.

Now leave a space equivalent to ont of the spaces on the first side of the lariat and tie a knot in just one of the cords. Thread on 1 small bead, 1 silver faceted bead, 1 platinum spacer and 1 small seed bead. Tie a knot trim.

Repeat this with the rest of  the beads to match the first side. I varied it a bit on this side and had two faceted silver beads and just one pink one. That way I ended up with a total of 3 pink beads and three silver beads when the lariat is folded over. Look down to see what I mean.

Felt Hearts with Lace, beads and ribbon

Have you noticed that decorated felt hearts are all the rage at the moment? Well, if you haven't you must be hiding under a craft free stone. They are all over Pinterest. I decided that I wanted to make one of my own designs. So I'll tell you how I get started on designing any of the projects that I let you have for free on this blog.

Today's project is a pretty, purple felt heart that I've decorated in beads, ribbon, and lace. 

Keep in mind that these are the quantities that they are sold in, you won't use any where near so much and if you buy the pack of hearts you will be able to make at least 3 of these hearts with lots of ribbon beads and lace left over for other projects.

To make this heart you will need:

Glass Seed Beads, Ceylon Round, Lilac, about 3mm, hole:1mm 6cm tube

Antique Mauve and Ivory Luxury Damask Ribbon 2 metres x 16mm

22mm Guipure Lace x 1 Metre - ivory

Purple Felt Hearts 7.5cm, wide 40% Wool and Synthetic Blend x 6

Light Orchid Satin Swiss Dot Ribbon, 3m x 6mm

Some soft filling. I used kapok.

Cotton, I used an off white sewing cotton, nothing special really, just what I had in my sewing bag.

Once you've assembled these pretty bits and pieces, you will need to start by stitching the mauve damask ribbon to the felt heart. I believe that the stitch is called whip stitch, but it is simply sewing the edge of the ribbon to the heart. 

Now trim the ribbon to match the heart exactly.

Lay on a piece of lace and stitch that to the heart too. Trim the lace. 

Sew the lilac beads to the top section of the heart in a random pattern.

With the cotton,  I used a blanket stitch, join about three quarters of the heart. Remember to add, and stitch in, the loop. You can make it as long or as short as you like. Fill with enough filling to make the heart puffy and finish off the blanket stitch to close the heart.

Finished.

New designers

I'm so delighted to tell you all that Craft Fairy is now sponsoring three new designers. Some of my Facebook buddies may have already spotted their makes on their facebook pages.
So let's start with Tina Cox who is already well known for her parchment craft designs. Many of you have no doubt seen her on Create and Craft. Well she has used Craft Fairy ribbons for years.  Now we're just making it official.

Let's start with one of Tina's cards that combines parchment and ribbon.

The ribbons and lace are availabe from http://www.craftfairy.co.uk

You can get Tina's designs her on her web page. http://www.tinacox.co.uk

String Bracelet Video Tutorial

Have you noticed how popular these string bracelets are becoming with both young and older people today? Well, if not, now is the time to start looking and making.

My apologies on Youtube's behalf. They seem to have cropped the edges of the video. It does play properly though.

You can get the string and buttons at Craft Fairy

http://www.craftfairy.co.uk/thread-and-monofilament-483-c.asp

 I'll put an image here so that you can see it if the YouTube image does not display properly.

Happy stringing.

Plum and Gold, Luxury Colours for a Ribbon Flower

Do you have trouble finding stamens?

Do you have trouble attaching stems to your ribbon flowers.

Well today, I hope to solve both of those problems in one fell swoop.

I've created this ribbon flower with a single stem from a bunch of 12 flower spikes. 

I chose satin as it has a fabulous sheen that brings the flowers to life. So for today's project I decided to use this luxurious plum satin ribbon as my treat. 

You need a length of ribbon
Plum Double Faced Satin Ribbon 3m x 23mm
A needle
some thread







Don't be afraid that this is a lot of difficult sewing. All you need to do is thread the needle and sew a running stitch along three edges.

When you 've done this, pull the thread to gather up the ribbon.

Put the stem in the center of the gather and pull the the ribbon tight around it.

Secure the ribbon with a few tight stitches and a knot or two.

If you can manage it sew through the wider part of the stem at the base of the spikes as this will really secure the ribboon in place. Turn around and admire your work.

How about a bunch of these flowers in a minature vase?

Textured pearl bracelet.

There's no denying that pearls are beautiful beads. They have a beautiful lustered shine that has been the object of many a wonan's desire since the time that jewellery making began. Can this be improved upon? Of course it can. With the new style textured pearl you retain the good of the old with the striking qualities of the new.

So, for this bracelet I've used textured pearls and smooth pearls to creat something modern but with a distinctly vintage feel.

The pearls that I used are:
Pearlized Glass Beads Strands, Matte, Round, Dyed, Barely Plum, 8mm 
4mm glass pearl strand, approx 220 pearls, White
I also used:
Purple 12/0 Glass Seed Beads, Transparent Colours, about 1.9mm - 6cm tube
Tibetan Silver Toggle & Bar, Lead Free and Cadmium Free
Monofilament 0.35mm
Wire Guardians, Silver colour
Silver Colour Crimp Beads
20g Assorted Silver Jumprings, 1.5mm thick wire

To make the bracelet you will need to cut 1 metre of monofilament. Thread it rhrough the guardian and centre it at the half way point. Now thread both strands through a crimp and squash the crimp.

You will need to use both ends of the monofilament. Pass both ends through a 4mm pearl. The thread 2 pearls on to the right hand thread and one onto the other. Now pass the left hand thread through the last pearl on the right hand one. You should now have a pearl with thread coming out of each side. See the illustration.

Step 1. On each end string an 8mm and a 12/0 bead. String each end in opposite directions through the 8mm pearl.

Step 2. With the filament coming out of the bottom end of the pearl, string a 4mm an 8mm and a 4mm pearl. With the top filament string a 12/0 seed bead and then pass both filaments on opposite directions through the 8mm pearl.

With the top filament string a 4mm an 8mm and a 4mm pearl, withe bottom end string 12/0 seed bead and then pass both filaments on opposite directions through the 8mm pearl.

Repeat the above 2 steps until you have 2.5cm of your finished length and then repeat Step 2.

With the bottom end string a 4mm and an 8mm, with the top end string an 8mm. Then string both ends in opposite directions through a 4mm.

Now string a 4mm on each end and then both ends in opposite directions through a 4mm pearl.

String both ends through a crimp bead, then string both ends in opposite direstions through and over the guardian.  Pass back through the crimp bead. Pull the filament fairly firmly so that it does not slip off the guardian and squash the crimp. Trim the monofilament close to the crimp.

Attach the clasps with jump rings.

Cube Beads Rock

Well, Christmas is over and my mind is already turning to spring and lighter colours. So, today, these new in cube beads took my fancy and I decided that I wanted to make something light and airy. This is the result.

I got out the trusty teapot to take the photograph as it hasn't had an airing for a while and I thought that the necklace would look good against the white of the pot.

The necklace is a breeze to make and cheap too. It only took 1 strand of these beads

6mm Cube, Crackle Glass Beads, Strands, Pink 32 pieces

Some white beads that I had spare.

100 metres of Monofilament 0.35mm

 Calottes, Silver Colour, 9mm long, 3mm wide, hole: about 1.5mm

15 Zinc Alloy Lobster Claw Clasps, Bright Silver Color, Size: 10mm long,

So, you can make on in no time.

Pearl and crystal bracelet

This is a quick post for inspiration only. I made this bracelet using:

Rhinestone Beads silver 
10mm glass pearl strand 8" strand Purple
6mm Silver Color, Iron Jump Rings
Tibetan Silver Toggle & Bar, Lead Free and Cadmium Free
100 Eyepins, Plated Silver Color, Nickel Free 30mm long, 0. 7mm thick,

Spend a little make a lot, Seed Bead Necklace

Spend a little make a lot is my motto for this post as I've made a necklace that uses only £1 worth of beads.

You all know what I mean when I say that I'm drawn to packs of beads with lots and lots of colours in them. They shine and seduce and when you get them home you wonder what on earth to do with them. Well, this is what I've come up with. I'm in the process of doing the Video clip but for now I'll content myself with showing you the piccies.

I used
20g 6/0 Glass Seed Beads, Dyed Colors, Round, Mixed Colors, about 4mm 1 pack
6 Alloy Chandelier Components, Lead and Cadmium Free, Antique Silver Color, 34mm just 2 of these
Tibetan Silver Toggle & Bar, Lead Free and Cadmium Free, x 6 sets just 1 set

100 metres of Monofilament 0.35mm I used less than 4 metres.

12 crimps

2 jump rings

Here's the video to explain how to do it.

Tropical Orange Necklace

I made this today with some of the beautiful beads in our vibrant orenge selection of big beads. Although I tend to wear a lot of silver I love gold and I teamed it with these oranges to make this statement necklace.

If you want to make one you will need: You will not need the whole pack of any of them.

Spray Painted Acrylic Beads, Oval, Orange, Size: about 25mm long, x 8 for £1.20

Spray Painted Acrylic Beads, Tube, Orange, Size: about 19mm long, 12mm wide, x 6 for£1.00

Orange Handmade Lampwork Beads, with Stripes, Heart shaped x 5 for £2.00

Golden Color, Metal Bead Spacers, 4mm x 100 for £1

1 Metres Side Twist Chain, Lead Free & Nickel Free, Golden Color Size: Links: about 5mm long, 4mm wide, 0.9mm thick. £1

Tibetan Style Toggle & T Bar Antique Golden, pack of 4 sets £1

Tigertail 

Golden jump rings I used some from this pack:

20g assorted Golden, Jump Rings, £1

Golden Colour Brass Crimp Beads, Nickel Free, Barrel, approx 200 crimps £1

Spend less than £10 and you will have enough left to make another necklace. Perhaps not an identical one but a similar one.