Textured pearl bracelet.

There's no denying that pearls are beautiful beads. They have a beautiful lustered shine that has been the object of many a wonan's desire since the time that jewellery making began. Can this be improved upon? Of course it can. With the new style textured pearl you retain the good of the old with the striking qualities of the new.

So, for this bracelet I've used textured pearls and smooth pearls to creat something modern but with a distinctly vintage feel.

The pearls that I used are:
Pearlized Glass Beads Strands, Matte, Round, Dyed, Barely Plum, 8mm 
4mm glass pearl strand, approx 220 pearls, White
I also used:
Purple 12/0 Glass Seed Beads, Transparent Colours, about 1.9mm - 6cm tube
Tibetan Silver Toggle & Bar, Lead Free and Cadmium Free
Monofilament 0.35mm
Wire Guardians, Silver colour
Silver Colour Crimp Beads
20g Assorted Silver Jumprings, 1.5mm thick wire

To make the bracelet you will need to cut 1 metre of monofilament. Thread it rhrough the guardian and centre it at the half way point. Now thread both strands through a crimp and squash the crimp.

You will need to use both ends of the monofilament. Pass both ends through a 4mm pearl. The thread 2 pearls on to the right hand thread and one onto the other. Now pass the left hand thread through the last pearl on the right hand one. You should now have a pearl with thread coming out of each side. See the illustration.

Step 1. On each end string an 8mm and a 12/0 bead. String each end in opposite directions through the 8mm pearl.

Step 2. With the filament coming out of the bottom end of the pearl, string a 4mm an 8mm and a 4mm pearl. With the top filament string a 12/0 seed bead and then pass both filaments on opposite directions through the 8mm pearl.

With the top filament string a 4mm an 8mm and a 4mm pearl, withe bottom end string 12/0 seed bead and then pass both filaments on opposite directions through the 8mm pearl.

Repeat the above 2 steps until you have 2.5cm of your finished length and then repeat Step 2.

With the bottom end string a 4mm and an 8mm, with the top end string an 8mm. Then string both ends in opposite directions through a 4mm.

Now string a 4mm on each end and then both ends in opposite directions through a 4mm pearl.

String both ends through a crimp bead, then string both ends in opposite direstions through and over the guardian.  Pass back through the crimp bead. Pull the filament fairly firmly so that it does not slip off the guardian and squash the crimp. Trim the monofilament close to the crimp.

Attach the clasps with jump rings.