design

Showing posts with label ribbon flower. Show all posts
Showing posts with label ribbon flower. Show all posts

Wednesday, 15 January 2014

Plum and Gold, Luxury Colours for a Ribbon Flower

Do you have trouble finding stamens?
Do you have trouble attaching stems to your ribbon flowers.

Well today, I hope to solve both of those problems in one fell swoop.

I've created this ribbon flower with a single stem from a bunch of 12 flower spikes. 

I chose satin as it has a fabulous sheen that brings the flowers to life. So for today's project I decided to use this luxurious plum satin ribbon as my treat. 

You need a length of ribbon
Plum Double Faced Satin Ribbon 3m x 23mm
A needle
some thread







Don't be afraid that this is a lot of difficult sewing. All you need to do is thread the needle and sew a running stitch along three edges.

When you 've done this, pull the thread to gather up the ribbon.

Put the stem in the center of the gather and pull the the ribbon tight around it.


Secure the ribbon with a few tight stitches and a knot or two.


If you can manage it sew through the wider part of the stem at the base of the spikes as this will really secure the ribboon in place. Turn around and admire your work.



How about a bunch of these flowers in a minature vase?




Sunday, 13 October 2013

Poppies for Remembrance


Christmas preparations are well underway and I am surrounded by red, green and some gold. So I thought that I would keep the Christmas colours going for a while with this green, red and cream card. It is also almost November Remembrance Sunday so this card is perfect for that too.
.

The stamp is from Stampinback and available here.
The ribbon is available here.
The buttons here
The sentiment here

To make this card you will need to stamp out the poppy on to a piece of watercolour paper or even hammer card. I used Stazon in Stone Grey to do this. Colour in the image.
Stamp out the saying and mount with red card.
Use some scrapbook paper to cover the base card and leave a thin margin all around the edge.
Use double sided tape to stick the ribbon to the card.
Mount the stamped poppy onto a piece of red card and stick onto the base card with foam pads. This will give it height.
Stick the sentiment and the buttons to the card and you're finished.

Thursday, 26 September 2013

Lace Trinket Jar



I though that I would use some of the beautiful really wide lace that we stock on the Craft Fairy site for today's project. It comes in two colours, but this time I chose the ivory lace as I wanted to make something that would be soft.

What I made was this trinket jar. It is decorated with a ribbon flower and the instructions for making one can be fould on this link.


What you will need are:

Scalloped Lace, 22 cm wide - Ivory
Wired Ribbons
an old clean jar
double sided tape
double sided foam pads
a ribbon flower that you can see on this link:
Fabulous folded ribbon rose video

Cut the lace so that it is the same height as the jar and wide enough to wrap around the jar with about half an inch of overlap.
 Put a piece of double sided tape along the lenght of one side of the jar and another around the outside of the mouth of the jar. You will need another piece inside the mouth of the jar.

Stick the lace to the jar. Use another piece of tape to stick down the overlap.


 Stick the ribbon to the outside of the mouth of the jar and then fold over and stick to the inside.

 Now, stick the flower to the side of the jar and you've finished.

Wednesday, 29 May 2013

Bags More Ideas

Last weekend I exhibited at the Hobbycraft Show at the Cardiff City Stadium and had a wonderful time. I met lots of wonderful crafters and I hope that I was able to inspire them with what we had for sale. I believe that the most popular inspiration was the bag designs. You've all seen them before, but to may customers they were new. So it has spurred me on to come up with more designs and this is the latest. It's artistically arranged in my garden of course.





You will see that I've used a different bag this time. Well you do need a bit of vatiety in life and a girl can't have too many bags.

All of the following items are linked to the website.
You will need:

Natural Sage Coloured Jute Bag

Red Ribbon with Green Saddle Stitching
This is a 23mm wide fairly soft ribbon which allows you to make the folds easily.

A piece of Light Stone Felt

Embridery Cotton

Buttons


First of all, make the roses  as described in a previous post. I make three widths of rose so that they would look better on the bag. All the same size is not so good. Look at the picture below to see what I mean. The graduating in size looks best.



Sew the roses to the felt as shown. Then stitch a line of embroidery thread to make stems. No need to be too precise here.
Sew the felt to the bag with blanket stitch.

I then added some large red buttons because I love buttons and because they look good on the bag.




Tuesday, 18 December 2012

Shabby Chic Lace Flower Tutorial

Shabby Chic Lace Flowers are really hot at the moment so this is my tutorial pick for today. If you click the image you will see the video.




I was inspired to make this flower as www.craftfairy.co.uk is now stocking this fabulous pointed lace. I believe that it is leavers lace. That is the same type of lace as the one used on Kate Middleton's wedding dress.

Apart from the lace, you will need a needle and thread and a flower to put in the centre. Please see my video on making folded flowers to see how to make one for yourself. 

Jackie has made a flower using this way of making lace and ribbon flowers on her blog, 

SCULLDUGGERY (CARDS BY JACKI)

So go look and see what she's made.

Monday, 17 December 2012

Pointed Petal Ribbon Flower

Well, the video camera has been out again and this time it is for a pointed petal flower. As I am into spots lately, I have used the fab taffeta and satin 38mm ribbon again. It really is too good to resist so why bother to try. This is what you'll get:




Here is a list of the things that I used:

38mm spot ribbon in Shocking pink
Buttons
thread
pins

Off you go. Now I want to see what you've made.

Monday, 10 December 2012

Tart Up a Bag

From this



To this with a little lace, a few buttons and some ribbon.





Getting from one bag to the other was a joy as I was working with such beautiful materials.
I chose one of the new cotton laces:
50mm Cotton Lace Natural x 1 metre
Some of the baby pink buttons:

Baby Pink Mixed Buttons for sewing and craft, 50g

Some ivory and Sherbet 16mm satin:
Some 3mm satin

Of course I also used one of the pink bags.


The pictures below are fairly self explanatory:

Start by putting a strip of double sided tape across the top of the bag. About a third of the way down is good.

 Then cut a piece of lace to fit with just a little to turn at the edges and stick to the double sided tape.


Add another layer of tape to the top of the lace and then stick the ribbon to the lace. Turn the raw edges so that they are hidden.




Now sew on the buttons, leave room to add the rose.


If you look at the finished bag, I also decided that a few dangly bits would look good so I tied buttons to the middle of about 5 pieces of 3mm ribbon and then sewed them to the bag before I sewed on the rose.

I hope that you have enjoyed this as much as I have. In fact, I think that I like this so much, I will use it rather than keeping it as a demo piece for the shows.

Saturday, 8 December 2012

Fabulous folded ribbon rose video.

Here's the latest video. Not calligraphy flowers for a change, but making roses.

To see the YouTube, of the tutorial for this ribbon rose, please click the picture below.

Wednesday, 5 December 2012

Mock Kanzashi Flower

I've entitled this entry a mock kanzashi flower, because It looks rather like a kanzashi flower, but it is made from ribbon rather than from fabric.


I've not shown you how to make a ribbon flower in a while and, truthfully. I made and photographed this one a while ago. You have seen a version of this on the jute bag.



So, if you want to make one of these then read on.

Take a length of strong thread and put a large knot at one end. Beware the small knot as it will not hold!

Start by cutting several pieces of ribbon. I used 23mm wide ribbon so the measurements below are for that type of ribbon. You will need to adjust the measurements if you use a wider or narrower ribbon.



Fold the ribbon over to make the shape shown below. Using the thread with the knot, begin to make small running stitches along the bottom edge of the folded petal as shown below.

When you get to the end of the first petal continue threading onto the next. Do not break the thread.



When you have threaded at least 5 petals on the thread, you can begin to pull the thread tight and as you pull, the petals will start to form a circle.


 Pull very tight and stitch the first petal to the last one and your basic flower is formed and ready to embellish. Below is what you should get.




Now all that you need to do is sew a button or bead onto the centre.



Follow Me on Pinterest

Saturday, 10 December 2011

Organza Ribbon flower

Well I must say that I do seem to be on a roll as far as these ribbon flowers are concerned and this is the latest. Ribbon and button offer.
What you will have in this tutorial is the basis bow that will allow you to build up lots more bows. I've kept this simple for you so I hope that you're ready to play along.

You won't need much to make this, just:

1.5 metres of 23mm ribbon. ( The wider the ribbon, the fuller the flower. If you use thinner ribbon you will need to wrap it more to get the fullness. All will become clear).
1 large button
a scrap of contrasting ribbon
thread
needle
1 piece of still cardboard 5cm x 15cm. ( Cut it off an old cardboard box).


To make the flower:

Start with cut piece of ribbon at the top of the card as seen.

Wrap the ribbon around the cardboard overlapping the pieces as you go. Tie a good knot in your thread ( don't worry as it's not going to be seen) and sew a running stitch along the bottom edge of the ribbon.


 Slide the ribbon off the cardboard.
 Pull the thread abd it will ruffle up the ribbon.

When you've pulled tight you can sew the two edges together at the back of the flower and open out the loops. Now you can leave it like this if you like.
 Or you can.....Cut the tops off the loops at a diagonal as shown.
Thread the scrap ribbon through the button and tie tightly. Sew in place in the center of your flower.
Do you like it?
Now I've put an offer on the Craft Fairy home site as usual so that you can get this ribbon at a lower price.
Click here for the offer.